EDHM25系列大孔徑珩磨機|西安高性能珩磨機

■主軸往復運動采用液壓伺服控制技術，往復速度可實現無級調速，響應速度快。

■主軸旋轉運動采用變頻電機驅動，可實現無級變速。

■珩磨砂條漲縮裝置為液壓雙進給結構，采用液壓比例控制技術或手動調壓閥設定實現壓力控制。

■液壓系統采用變量泵，并采用強制冷卻，保證液壓油溫度恒定。

■機床冷卻系統為循環冷卻，采用磁分式紙帶過濾機兩級過濾，并使用油冷機強制冷卻。

■機床可配置在線自動測量系統以保證珩磨工件尺寸一致性。

■控制系統采用高性能運動控制器，配置TFT彩色液晶觸控面板。專為珩磨加工定制的人機界面更具人性化。

■ Hydraulic servo technique control of position and speed is used for spindle reciprocation. Therefore infinite variable speed and quick response speed are realized.

■ The spindle is driven by a inverter motor; it rotates and outputs infinite variable speed.

■ Honing extension system is in hydraulic double-feed design, in which constant pressure control is ensured by use of proportionally controlled technique or manual set by pressure regulating vlave .

■ Variable pump is used in hydraulic unit. Forced cooling is supplied for hydraulic unit, which guarantees constant temperature oil.

■ Circulation cooling is used in the cooling system. Magnetic-separating two-stage paper filter ensures clean honing fluid. Forced cooling is supplied by oil cooler so that the honing fluid is always kept in optimum temperature.

■ The machine is equipped with an on-line metering and measuring system, which ensures consistency of honing tolerances.

■ The machine is controlled by high-performance motion controller with TFT liquid crystal color touch panel. The human-machine interface especially made for honing shows humanistic feature.

■集成式液壓站，采用油冷機冷卻方式，保證液壓油溫度恒定。
■ Integrated hydraulic station, cooling by oil cooler, ensure that the hydraulic oil temperature constant.

過濾機

■機床冷卻系統為循環冷卻，采用雙油箱設計，磁分式紙帶過濾機兩級過濾,并使用油冷機強制冷卻。
■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.

25夾具

■機床夾具采用下壓油缸方式
■Down press type oil cylinder

通徑伺服閥

■沖程往復控制采用液壓伺服控制技術。
■ Stroke reciprocating control hydraulic servo control technology.

■機床采用自動上下料裝置，降低勞動強度
■ The machine adopts automatic loading and unloading device, reduce labor intensity.

EDHM25系列大孔徑珩磨機參數